Payment & Shipping Terms:
|Type:||Aquariums & Accessories||Aquarium & Accessory Type:||Water Pump|
|Material:||ABS Plastic Shell||Color:||Black And Red|
|Product Name:||Aquarium Water Pump||Voltage:||24v|
variable speed freesea submersible pump,
24v freesea submersible pump,
freesea submersible aquarium pump
1. Use in / under water or outside
2. The water pump uses the latest three-phase power with brushless and sensorless control technology, which saves up to 60% energy.
3. Using closed impeller designs can be economically efficient to improve lift and performance.
4. Quiet, suitable for fresh and sea water.
5. Ceramic shaft, wear resistance, no rust.
6. The outlet realize multi-stage over connection suitable for a variety of pipe diameters.
DC 24V ultra-quiet submersible pump
Sturdy structure, high lifting height, removable cover
The pump is a complete solution for fountains, external filters, any indoor or outdoor facility.
The water pump shaft and drive ring are made of silicon carbide material.
It can be disassembled without tools. Install the pump vertically or horizontally to suit your space. They have the power required to make a large amount of water flow through your water feature.
The solid structure can extend the service life; it is not easy to damage.
Low noise, ultra-quiet operation design.
Can be used in humid or dry environment.
Used in ponds, fountains, waterfalls, hydroponic systems, irrigation systems.
Voltage/frequency: 110V / 60Hz
Output: 2245GPH, 8500L/H
Lifting height (maximum): 5.7m / 19ft
Power cord length: 4.3m / 14.3ft
Ideal for ponds, water gardens, fountains, aquariums, waterfalls, statues, hydroponics and irrigation systems.
No tools are needed. You can easily replace the cigarette holder or remove the protective cover for cleaning and maintenance.
Stable suction cup base
The suction cup base is stable enough to avoid tipping even when operating under the highest pressure.
Submersible pump for koi ponds, waterfall fountains, fish tanks and aquariums
For your own safety, please contact an electrical specialist if you have any questions or problems!
Do not connect the power supply if all parts are not installed.
Do not use the pump in water temperatures above 35 ° C.
Only connect the pump to a power supply with ground contact. This type of outlet must be set up in accordance with the relevant national guidelines (vde.en ... iec etc.) to ensure that the ladder extends to the pump.
When connecting to the power supply, pay attention to the voltage indicated on the.
Electrical systems on garden ponds must comply with international and national installation guidelines.
Only operate the pump when nobody is in the water!
Never lift / carry the pump by the cable.
The pump must not be operated if the cable or the housing is defective!
Never displace liquids other than water.
Warning: the pump will automatically stop working if it is overloaded or without water.
Contact Person: sales