The Most Safety Operation
How to adjust temperature:
There is a regulator connect with power cord, just press the button after heater has been installed,
and you can will see the LED display shows °F,
press the button until you see the display shows your expecting temperature (display 59~93℉ in cycle by),
and then leave it for heating up.
Expecting temperature is : 80℉ Heater display shows: 70℉ Then, Press the regulator 10 times,
then you will see the display shows from 70 to 80°F.
When you see the display shows 80°F,
then leave it for heating.
1. The heater must be fully submerged in water, or it will cause the malfunction of the product 2. The power socket should be set higher than the sink
3. Be sure to use the heater under specified voltage
4. Make sure to unplug the power before any cleaning, maintenance or moving of the heater, and make sure it has been cooled down for at least 5 minutes
5. Do not use the heater if the power cord and plug is damaged
6. Do not insert or pull the plug with wet hands, electric shock may be caused
|Suitable tank size
||1-10 gallon fish tank
||ABS Plastic Shell