CE Certificates Motor Hydroponic Water Pump For Pond / Submersible Fountain Pump

Hydroponic Water Pump For Pond Aquarium Fish Tank Submersible Fountain Pump

Description:

In order to ensure safety, all products are strictly inspected and tested, please according to the instructions for operation in case pumps are destroyed.

1. There is inside the pump or dirt into obstacles will reduce the effect of use of the product, if the pumps, pump out dirty cleaning of dirt.

2. Clean water pump, remove the front cover and waterleaf, with little brush or water, dirt, don't move pump shaft.

If the pump does not operate, according to the following verification:

1. Check whether the circuit is damaged, for another input to ensure that the pump power;

2. Ensure that the inlet without dirt;

3. Take out the rotor to ensure that the rotor is not damaged or blocked.

Attention:

1. Please power off before use;

2. Please don't burn;

3. Do not directly use the power line to pick up the pump;

4. Do not operate in hot water;

5. Work in clear water

Note:

1. Please use socket with stable voltage and keep the motor running within rated power to ensure long lifespan.

2. Prohibit no-load running. Put the pump into water first before connecting power supply. When changing water, please disconnect power supply. It would shorten its lifespan and lead to making loud noises when running in the air for long time.

3. If the product suddenly stop working or make noises, which may caused by debris blockage. Please clean it regularly about once every two months, or add some olive oil on the rotor.

4. Please note if the water level, layout of the water tank match the bump power before purchasing. If the water is too little, motor power is too high, so as the water flow level, the swashing water would make loud noises. Different bump suits different water tank.