|
Product Details:
Payment & Shipping Terms:
|
| Model Number: | FDC-10000 | Place Of Origin: | Foshan, China |
|---|---|---|---|
| Brand Name: | Freesea | Hertz: | 50Hz/60Hz |
| Feature: | Energy Saving | Voltage: | 24v |
| High Light: | vfd water pump,brushless motor water pump |
||
New dc Return Pump With Sine Controller for Coral Reef Fresh Tank Sump Skimmer
Paramerter
| Model | Power(W) | H-max(M) | Max-flow L/H | Hose Size mm | Voltage |
| XDC3500 | 25 | 4 | 3500 | 8.5 | 24V |
| XDC4500 | 35 | 4.5 | 4500 | 8.5/13 | 24V |
| XDC5500 | 45 | 5 | 5500 | 8.5/13 | 24V |
| XDC7000 | 50 | 6 | 7000 | 8.5/13 | 24V |
| XDC8500 | 60 | 6.5 | 8500 | 16/19/25 | 24V |
| XDC10000 | 85 | 7.5 | 10000 | 16/19/25 | 24V |
| XDC12000 | 85 | 6 | 12000 | 16/19/25 | 24V |
| XDC15000 | 120 | 6 | 15000 | 16/19/25 | 24V |
Features:
Apply to ponds, rockey, bourn, aquarium tanks and seafood tanks with water recycling equipment matching.
Novel design and generous, use the variable frequency technology; Small power, large flow, high head, super silence and amphibious
Use ceramic shaft, wear resistance, no rust, , lng service life; Both fresh and seawater, do not contain copper element;
This product realize free tool demolition, easy to clean.
The outlet realize multistage over, suitable for a variety of pipe dia connection;
The locked-rotor protection function (immediately cut off power after water leaf card dead)
Description
SMART CONTROLLER:
Constant Flow Mode:When the dc Pump is switched on,the LCD screen on the controller will display between “101” and “120” .namely that the water pump enters into the constant FLOW mode With 20 different speed settings, To increase the speed of the pump press “+” until you reach the required level (maximum FLOW will be displayed on the LCD screen as 120,To decrease speed press “ - ”,Minimum flow display "101",users can adjust the flow by the actual demand.
Wave function (mode): When the number between “201” and “220” can be displayed on the controller, There is a total of 20 bands that you can press the "+" and "-" buttons to adjust wave bands. When the number is 201, you can get the fastest wave band. When it is 220, you can get the maximum wave band. The wave mode is designed on the sudden difference between the amount of supply water and the maximum amount of water to achieve . Note: when switching to wave function(mode) via the “MODE” button, the starting water of the constant flow mode is set between “101” and “115”, and the effect of the pulse mode is more obvious.
Feed Mode: Press “ fish ” to pause pump operation for 10 minutes.If you wish to restart the pump before the end of the 10 minute pause, press “ fish ” again and the pump will restart.
Contact Person: Ms. Sindy Jin
Tel: +86-13535307437
Fax: 86-020-36401571
