|
Product Details:
Payment & Shipping Terms:
|
| Flow Rate: | 2500L/H | Place Of Origin: | Foshan, China |
|---|---|---|---|
| Head: | 2.5m | Application: | Water |
| Certification: | CE | OEM: | Available |
| High Light: | submersible aquarium pump,adjustable flow water pump |
||
High Quality Ceramic Shaft Aquarium Water Pump Low Energy Consumption 40w Power
Features:
1. Samrt control, dry running automaticly cut power.(Principle:Dry running opreation will increase motor temperature, then the pump will automatically shut down, but the motor will restart working after the temperature goes down. Therefore, when the motor automatically turned off we need to cut off power immediately. This function can effectively reduce the damage caused by dry running.)
2. With bottom suction trainer,100% submersible.
3. Maximum flow rate: 330GPH STRONG POWER and HIGH LIFT. Max Lift Height: 6 ft. 40W high efficiency motor for energy saving.
4. Lift height is a max height the water goes up, after connecting the water pipe to the nozzle (Make sure the joint sealed securely and tightly) SUCTION CUP and 5.9Ft POWER CORD. Long enough cord for easy installation.
Paramerter:
| Model | Voltage | HZ | Power(W) | Flow(L/H) | Hmax(m) | |
| FS-1000 | 110V-240V | 50/60 | 6 | 350 | 0.6 | |
| FS-1500 | 110V-240V | 50/60 | 12 | 650 | 1.2 | |
| FS-2000 | 110V-240V | 50/60 | 25 | 1200 | 1.8 | |
| FS-2500 | 110V-240V | 50/60 | 40 | 2500 | 2.5 | |
| FS-3500 | 110V-240V | 50/60 | 60 | 3500 | 3.5 | |
| FS-4500 | 110V-240V | 50/60 | 100 | 4500 | 4.5 | |
| FS-5000 | 110V-240V | 50/60 | 125 | 5000 |
5 |
|
Warning:
Risk of electric shock is certain that it is connected only to properly grounding-type receptacle.
Do not connect to any voltage other than that shown on the pump.
Do not pump flammable liquids
To reduce the risk of electrical shock, use only on portable self-contained fountains no larger than 5 feet in any dimension.
Do not use with water above 35C (95F).
Operate pump completely submerged for proper cooling.
Not for swimming pool.
Clearing:
To clean the pump, remove the back cover and the impeller. Use a small brush or stream of water to remove any debris.
IF THE PUMP FAILS TO OPERATE, CHECK THE FOLLOWING:
Check the circuit breaker and try another outlet to ensure the pump is getting electrical power.
Check the pump discharge and tubing for kinks and obstructions. Algae build up can be flushed out with a garden hose.
Check the inlet to ensure it is not clogged with debris.
Remove the pump inlet to access the impeller area. Turn the rotor to ensure it is not broken or jammed.
Monthly maintenance will add to your pump's life
We guarantee our products for a period of 12 months.
Contact Person: Ms. Sindy Jin
Tel: +86-13535307437
Fax: 86-020-36401571
