Engineer Plastic 72v Dc Solar Powered Water Pump Solar Water Circulating System
Paramerter:
|
|
Model
|
Voltage
|
Power(W)
|
Hmax(m)
|
Qmax(m³/h)
|
Port Size(mm)
|
Sloar Panel
|
Current
|
|
|
|
FLS-370/24
|
24V DC
|
370
|
10
|
10
|
50
|
2pcs 30V/250W Parallel connected
|
14.5A
|
|
|
|
FLS-550/60
|
60V DC
|
550
|
12
|
15
|
50
|
3pcs 30V/250W Series connected
|
9A
|
|
|
|
FLS-750/72
|
72V DC
|
750
|
13
|
16
|
50
|
4pcs 30V/250W Series connected
|
11.5A
|
|
Application:
Irrigation purpose
Drinking Water
Leisure Applications
Pond aeration & livestock watering
Pond management
Drip & Sprinkler
Industry water supply
Water purification systems
Filtration and pool circulation
Pump Use Precautions:
1. If the pump has any small faults, remember not to let it work. If the filler of the pump shaft is worn out, it should be added in time. If the pump is used continuously, it will leak. The direct effect of this is that the motor consumes more energy and can damage the impeller.
2. If the pump has a strong vibration during use, be sure to stop and check what is the cause, otherwise it will cause damage to the pump.
3. When the bottom valve of the pump leaks, some people will fill it into the inlet pipe of the pump with dry soil and flush it to the bottom of the valve. This is not desirable. Because when the dry soil is put into the water inlet pipe, when the water pump starts to work, the dry soil will enter the pump, which will damage the water pump impeller and the bearing, which shortens the service life of the water pump. When the bottom valve leaks, it must be repaired. If it is serious, it needs to be replaced.
4, the pump must pay attention to maintenance after use, for example, when the pump is used up, the water in the pump should be cleaned, it is best to remove the water pipe and then rinse with water.
5, the tape on the pump should also be removed, then rinse with water and dry in the light, do not put the tape in a dark and humid place. The tape of the pump must not be stained with oil, and do not apply some sticky material to the tape.
6. Carefully check the impeller for cracks. If the impeller is fixed on the bearing, if it is cracked or loose, it should be repaired in time. If there is mud on the pump impeller, it should be cleaned up.
Features:
1. Permanent Magnet Brushless motor, combined with controller, reaches the max efficiency over 85%.
2. Motor control system has complete electrical protecting controller device, against under-voltage, over-voltage, over flow, overload, waterless etc; automatic recovery; controlling water height as demand; reliable and safe.
3. Advanced controller with MPPT technology for maximum solar power
4. Convenient installation and environmental protection.
5. No sepcial requirments on well pipe.
6. Ambient temperature: -20-50 degree Celsius.
We Promise:
1) We are very glad that customer give us some suggestion for price and products.
2) If any question, please let us know it in the first by E-mail or Telephone. We can deal with them for you in time.
3) We will send many news styles in every week to our old customers.
4) Offer our customers the lowest prices. Streamline the buying and paying processes.
5) Deliver goods to our customers all over the world with speed and precision.
6) Ensure the excellent quality of our products.
7) 12 months FREE warranty.
8) Accept OEM
Your message must be between 20-3,000 characters!
