Outdoor/ Indoor Spa Self Priming Pump , 110v Swimming Pool Stream Water Pump

Self Priming Pump Swimming Pool 110v Swimming Pool Stream Pump

USAGE:

• Swimming pool.
• Outdoor/indoor spa.
• Water transfer.
• Well/River pumping.
• Domestic water supply.
• Gargen or agricultural irrigation.
• General industrial service.

Quality Assurance

1. Product qualifaction rate box 100%.

2. 1 years factory warranty period.

3. Less than 2‰ defective rate.

4. 24hrs after-sales service.

USE AND MAINTENANCE:

1. You should make the pump working in the standard rotate speed in use process, don't speed up at will, in order to avoid potential safety hazard and impact the useful life of the pump.

2. Direct coupled type pump units:the chassis must remain stable, so as not to damage the coupling.
Belt wheel type pump units:the two pulleys must be aligned, the belt loose or tighten must be moderate. If the pump doesn't turn, it is generally because the impeller-ring get rusty, you can use the mallet knocking the coupling axially.Pump mounting height(in order to suction the water tank as the base)should be less than the permit smoking on 1-2meter high vacuum.

NOTICE
Pump suction and discharge connections have moulded in thread stops, DO NOT try to screw pipe
in beyond these stops.
OPERATION
NEVER run pump dry! Running pump dry may damage seals, causing leakage and flooding! Fill
pump with water before starting motor.
Before removing lid:
STOP PUMP before proceeding.
CLOSE GATE VALVES in suction and discharge pipes.