100 Percent Copper Wire Motor And Electric Fuel Swimming Pool Water Pump System
Paramerter:
|
|
Model
|
Voltage
|
HZ
|
Power(KW)
|
Power(HP)
|
Hmax(m)
|
Qmax(m³/h)
|
Port Size(inch/mm)
|
|
|
|
FBS-100
|
220V-380V
|
50/60
|
0.75
|
1
|
7
|
16.5
|
50 1.5”
|
|
|
|
FBS-150
|
220V-380V
|
50/60
|
1.1
|
1.5
|
8.5
|
18.5
|
50 1.5”
|
|
|
|
FBS-200
|
220V-380V
|
50/60
|
1.5
|
2
|
10
|
21
|
50 1.5”
|
|
|
|
FBS-300
|
220V-380V
|
50/60
|
2.2
|
3
|
13
|
25
|
50 1.5”
|
|
Features:
1) Magnificent flow rate and lift, the core energy of water circulating, 2~3m suction lift
2) Engineering plastic body, the pump can be effectively protected under bad weather,
long service life;
3) Seiko manufacturing, low noise during the pump working time;
4) Free-tool filter cover design, easy to maintenance;
5) IP55 protection level, with None-leaky design;
6) German technology IBC bearing, 100% copper wire motor, 24 hours running.
7) Anti-rust cast-aluminum motor cover, fast heat dissipation; PPO plastic steel material
impeller, resist high temperature and corrosion
8) Silicone sealing ring cover all watering section, enhance pump sealing system
9) CE certificated, reliable and safety
INSTALLATION AND APPLICATION:
These pumps are suitable for handing clean water not containing abrasive particles and fluids which are not chemically aggressive to the pump components. reliable, compact, economic and simple to use, They are particular suitable for domestic and swimming pool applications such as water supply for recirculation in air conditioners and refrigerators, industrial water uses in general, and the automatic distribution of water from surge tanks, watering gardens, lifting water from tanks or wells down to 9m depth.
These pumps should be installed in a covered area, protected against the weather.
USE AND MAINTENANCE:
1. You should make the pump working in the standard rotate speed in use process, don't speed up at will, in order to avoid potential safety hazard and impact the useful life of the pump.
2. Direct coupled type pump units:the chassis must remain stable, so as not to damage the coupling.
Belt wheel type pump units:the two pulleys must be aligned, the belt loose or tighten must be moderate. If the pump doesn't turn, it is generally because the impeller-ring get rusty, you can use the mallet knocking the coupling axially.Pump mounting height(in order to suction the water tank as the base)should be less than the permit smoking on 1-2meter high vacuum.
3. You should stop the engine if you discover abnormalities(such as noise, shock, hydraulic discharge descend etc.),and attention the bearing heat up, the temperature can't exceed 75°C.
If stop using for a long time, you should discharge the water in the pump, overhaul and oil, keep it in a dry and ventilate shade.
In winter, you should discharge the water at once when you stop using it in case frost crack.After the pump every 1000 hours operating time, you should take down and clean the bearing, and exchange quick-wear parts.
OUR FACTORY:
FREESEA group has been engaged in water pump industry for more than 15 years. Mainly produce water pump equipment: swimming pool pump, circulation pump, Multi-function submersible pump etc. It is located in Ningbo city Zhoushan island, we provide OEM service for many famous pool brand in foreign & domestic market. Pumps annual output more than 20 thousands. We accept different standard(USA, EU, CN etc).Has many branches in China main city and Spain, sales network extend to all over the world.
Your message must be between 20-3,000 characters!
