Water Treatment System Swimming Pool Commerical Electric 2HP Water Pump
| Model |
Voltage |
HZ |
Power(KW) |
Power(HP) |
Hmax(m) |
Qmax(m³/h) |
Port Size(inch/mm) |
| FL-150 |
220V-380V |
50/60 |
1.1 |
1.5 |
18 |
30 |
63 2” |
| FL-200 |
220V-380V |
50/60 |
1.5 |
2.0 |
19 |
35 |
63 2” |
| FL-300 |
220V-380V |
50/60 |
2.2 |
3.0 |
20 |
38 |
63 2” |
| FL-350 |
220V-380V |
50/60 |
2.6 |
3.5 |
21 |
40 |
63 2” |
| FL-400 |
220V-380V |
50/60 |
3.0 |
4 |
22 |
48 |
63 2” |
MULTI-APPLICATION:
Sauna, SPA, Swimming pool, water park , water treatment.
DESCRIPTION:
1. Designed for medium head installation in medium pools or domestic pools
2. Anti-corrosive
3. Using import bearing
4. Extremely quiet
5. External heat sink to ensure normal working
6. Specially made Union or incorporate both metric and imperial measurement standard
7. Superior high and medium head performance
8. More efficient and dependable than any other pumps
9. Improved 1,1-1/2, 2HP flow
10. Anti spin-off impeller
11. Giant strainer basket
12. Stainless steel port reinforcement
Working Conditions:
M edium temperature:5~50 C
Environment temperature:< 60 C2. Application :
FRE ESEA circulation&filtration pump canbe used for
aquaculture, water project, large sizeswimming pool,water park, etc.
Pump Use Precautions:
1. If the pump has any small faults, remember not to let it work. If the filler of the pump shaft is worn out, it should be added in time. If the pump is used continuously, it will leak. The direct effect of this is that the motor consumes more energy and can damage the impeller.
2. If the pump has a strong vibration during use, be sure to stop and check what is the cause, otherwise it will cause damage to the pump.
3. When the bottom valve of the pump leaks, some people will fill it into the inlet pipe of the pump with dry soil and flush it to the bottom of the valve. This is not desirable. Because when the dry soil is put into the water inlet pipe, when the water pump starts to work, the dry soil will enter the pump, which will damage the water pump impeller and the bearing, which shortens the service life of the water pump. When the bottom valve leaks, it must be repaired. If it is serious, it needs to be replaced.
4, the pump must pay attention to maintenance after use, for example, when the pump is used up, the water in the pump should be cleaned, it is best to remove the water pipe and then rinse with water.
5, the tape on the pump should also be removed, then rinse with water and dry in the light, do not put the tape in a dark and humid place. The tape of the pump must not be stained with oil, and do not apply some sticky material to the tape.
6. Carefully check the impeller for cracks. If the impeller is fixed on the bearing, if it is cracked or loose, it should be repaired in time. If there is mud on the pump impeller, it should be cleaned up.
Our Factory
FREESEA group has been engaged in water pump industry for more than 15 years. Mainly produce water pump equipment: swimming pool pump, circulation pump, Multi-function submersible pump etc. It is located in Ningbo city Zhoushan island, we provide OEM service for many famous pool brand in foreign & domestic market. Pumps annual output more than 20 thousands. We accept different standard(USA, EU, CN etc).Has many branches in China main city and Spain, sales network extend to all over the world.
Our Service:
We take customer needs very seriously. Tasks and challenges are solved together
with the customers - using our high expertise in product technologies, process
technologies and logistics. Our professionalism guides us through the development
and production process.
Knowing the customer is the priority of all we do.With the customers' specific
technical data and requirements fully in mind.We make a promise that every
process of the cooperation is clear. As production begins, we focus on working along
multiple lines. Even once the order has closed, MEDAS still provides meticulous
after-sales service.
Your message must be between 20-3,000 characters!
